Oven Brite Oven Cleaning Kit

Description

How to transform racks and racks: Step 1: Carefully place no more than 2 shelves in the cleaning bag, being careful not to tear or puncture the bag. Add approximately 1/2 to 1/3 of the oven cleaning solution. Step 2: Close the bag while dissipating as much air as possible and then fold the bag around the rack, keeping the solution in the area to be cleaned. Gently tip the bag until the solution has coated the rack and leave for 2 hours. Step 3: After 2 hours, tilt the bag again to re-coat the rack and allow to soak for an additional 4 hours. For best results, leave them overnight. Step 4: To remove the rack, just open the bag and pull down the sides. Do not touch inside. Remove rack and rinse thoroughly in hot, soapy water. How to transform the oven interior: Step 1: Add some of the remaining solution directly to the center of the oven. Step 2: using a sponge / chamois, carefully apply to the areas to be cleaned. Step 3: soak for at least 4 hours or for best results leave overnight. Step 4: Remove residue with a sponge / cloth and rinse with plenty of hot soapy water. A second Application may be necessary depending on the accumulation. Please note: double check the surface material before applying and refer to the manufacturers instructions. When in doubt, do not use it. Oven Pride is suitable for use on most common stainless steel and enamel surfaces. Protect other surfaces from any leaks, being careful not to leave the solution in areas you do not want to clean. Check bag and gloves thoroughly before use. Ventilate the room during and after use. Rinse and dry your hands after use. Do Not Use On Aluminum, zinc, copper, tin, or painted, damaged, non-stick, or self-cleaning surfaces. Do not let the solution come in contact with oven door weatherstripping, pilot light, or heating elements and fan. Do not leave the bag or treated area unsupervised or where children or animals can come into contact with it.